($7,717) MODEL 624XT - HYDRAULIC FEED 4" CAPACITY MINIMUM 16 HP REQUIRED AT THE PTO.
($1,176) Speed Sensing.
($504) Adapter, I-Match Quick-Attach.
YouTube Video: https://youtu.be/bqFfKELoKyg
Made in the USA.
This unit is a hydraulic feed version of our Model 624PTO Chipper. The same rugged construction as all of our chippers, this unit will provide the customer with years of service with normal maintenance procedures. The Model 624XT will require remote mounts on your tractor for the hydraulic feed. The Flow Control is standard and adjustable to meet the needs of almost all tractors hydraulic flow.
This is one tough little machine! 1/2" double sided chip blades, large 4" x 5" infeed opening, 3/4" thick impeller and 360 degree exhaust chute are just some of the features that put this machine way above all others in its' size.
The Model 624, is a 4" capacity chipper with a large 4" x 5" infeed opening. Clear, debris curtain strips help protect the user from fly back of material. This unit utilizes, 1/2" thick x 7-1/4" long x 4" wide, Double Edge, chip blades and a 1/2" thick, reversible, sharpenable, and replaceable bed knife, for consistent chip size and chipping capabilities of even those small, viney, stringy, messy jobs! 360 degree Exhaust Chute, and Easy Adjust Exhaust Flap. No tools are required to adjust the exhaust flap or the exhaust chute. Full size PTO shaft and cover is supplied with the unit. 540 PTO RPM recommended.
Only 16 HP Required at the PTO!
Large 4" x 5" infeed opening, means less pruning and trimming Clear debris curtain strips help protect the user from fly back of material.
3/4" Thick x 22-1/8" Diameter, 130 LB Impeller, with 4-welded and gusseted paddles for better chip discharge & air flow. 2 - 1/2" Thick, double-sided, chip blades, segmented into 2-knife pockets. Easy access to blades through 7 -gauge thick steel impeller housing. 4 - Bolt, cast iron, self aligning, greaseable bearing. Replaceable, Sharpenable, Adjustable steel Bed Knife.
Quality of Workmanship, Innovative Design, Built to Last!
Easy Adjust Exhaust Flap. No Tools Necessary.
Easy Access to 1/2" Thick x 7" Long Double Sided Chip Blades (Qty. 2).
Adjustable, Sharpenanble Bed Knife.
7 Gauge Steel, Infeed Chute, Continuous Welds for Extra Strength.
Heavy Duty 7 Gauge Steel Frame, Fully Gusseted for Strength.
13 Gauge Steel Exhaust Chute, Continuous Welds for extra strength
360 Degree Exhaust. No Tools Necessary.
7 Gauge Thick Steel Impeller Housing is Vented to Provide More Air Flow for Chip Exhaust.
3-Point Hitch Pins are Provided.
PTO Shaft and Cover is Standard.
Payment can be made over the phone via Visa, MasterCard, American Express or Discover by calling 239-357-1853 Craig.